Based on the ultimate sharpness, the blade of the Tojiro DP satisfies even the most demanding. Having over 5 processes for the construction of the blade and its sharpening, Tojiro's craftsmen spend a lot of time to achieve the best possible result. The core of the knife is made of VG10 and is covered by two layers of soft stainless steel with 13% chromium content for easier sharpening and better protection of the knife.

The hardness level is 58 (±1) HRC (a knife with hardness above 56 HRC is considered good).

It is recommended to make cuts on wooden or plastic cutting surfaces. Glass, stone, and marble cutting surfaces are unsuitable as they can cause permanent damage to the knife blades.

Wash the knife with warm water before using it for the first time. After each use, make sure to wash the knife immediately (with a mild detergent) and dry it with a soft cloth. Especially if you have cut acidic foods, you should wash the knife immediately after use.

For your own safety, you should always wipe the knife away from your body and away from its edge, using a cloth or towel.

It is not recommended to wash it in the dishwasher but by hand, in order to protect its material and maintain its sharpness for a long time.

No matter how sharp a knife is at the beginning, after some use it needs sharpening, something that you can achieve with a sharpener, sharpening stone or strop.

You can tell if your knife cuts well with an easy test using the knife and a piece of paper. A sharp knife can easily and cleanly cut through a piece of paper. On the other hand, a knife that needs sharpening will struggle and its cutting will be rough.

Also, it is advisable to sharpen your knives with a professional occasionally, to repair possible damage to the blade's edge and to maintain sharpness.