• Authentication to prevent forgery
• Jamming detection and communication channel encryption 
• Tamper alarm
• The additional microwave sensor filters potential interference from air conditioning and curtain movement
• The device operates for up to 5 years without battery replacement 
• Ignores pets weighing up to 20 kg and up to 50 cm in height
• High-tech PIR sensor and optical system
  with a detection range of up to 12 m, and Viewing angles of 88.5°/80°
• Two-way encrypted communication with the control panel within a range of up to 1,200m
• Tamper alarm
• Pairing with the internal security system in 30 seconds via QR code
• Mobile and desktop applications for customization, testing, and controlling the security system

When installed and configured correctly, the MotionProtect Plus does not react to animals up to 50 cm in height and up to 20 kg in weight. 

The detector should be installed at 2.4 meters without obstructing its view. For example, in a corner where the view will not be obstructed by a wardrobe or other furniture that a pet might climb on. 

It is also important to set the correct sensitivity in the detector settings: 

• High — the detector does not react to cats (up to 25 cm in height).
• Medium — does not react to small dogs (up to 35 cm in height). 
• Low — does not react to animals up to 50 cm in height.

When indoor motion detectors are installed below the recommended height, animals move into the hypersensitivity zone. The detector may trigger an alarm. The detector will also alert if the animal can jump to the level of the MotionProtect Plus or move close to it.

• MotionProtect Plus 
• SmartBracket mounting panel 
• 1 x CR123 (pre-installed) 
• Installation kit 
• Quick start guide