Thanks to Inverter technology, it maintains a stable temperature and consumes less energy than regular instant water heaters, as it only uses the necessary power to heat the water to the desired temperature.

Compatible with solar or boiler systems and can be installed in series with them, taking advantage of the existing warm water and achieving even greater savings.

The operating power and consumption are controlled by the electronic brain according to the temperature and flow of the incoming water, in order to select the desired temperature precisely and maintain it stable.

The selected temperature ranges from 30°C to 55°C, is adjusted with touch buttons and displayed on the large screen, where the operation and programming options are also shown.

In the menu, you can see the consumption in kW at any time.

It has 2 temperature memories that you can easily adjust for each use:

Example: 1 for a temperature of 35°C for hand washing and 2 for a temperature of 42°C for shower or any other desired temperature.

The instant water heater has a cold water inlet pipe, which passes through the resistance, heats up, and comes out in the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is the pressure of the cold water inlet not being too low.

The temperature of the water is regulated by a thermostat, so as not to exceed a maximum value. The temperatures that the hot water reaches are pre-set so that someone can use the hot water directly, without the need for mixing with cold water.

The maximum temperature that can be reached for hot water production is 55 °C, while the maximum flow rate of the water reaches up to 8 liters per minute. Indicatively, 38-42 °C degrees are the standard for shower use.

• It is small in size and does not take up much space.
• There is no energy loss, as only the water being used is heated at that moment. Therefore, there is savings on the electricity bill. In a traditional water heater, the unused hot water goes to waste.
• The hot water used in the instant water heater is used as is, without mixing with cold water, as in a traditional water heater. This results in water savings, in addition to electricity.
• There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water starts running in a few seconds. A traditional water heater takes a few minutes, depending on its size.
• The hot water never runs out. As long as we have the tap open, we will have hot water.